HVTC-90 DN20
Thermostatic mixing pump group
Description:
The thermostatic mixing pump group DN 20 - ¾" "HVTC-90" is a low temperature unit used in underfloor heating systems. It consists of a 3-way mixing valve controlled by a thermostatic actuator by which the temperature to be maintained constant in the flow is set.
It is equipped with a safety system consisting of a contact thermostat installed on the flow and connected to the pump. In this way it is ensured that switches off the pump if the temperature exceeds the set threshold.
The valve is supplied with 2 by-passes:
- upper by-pass (system side): it takes part of the water from the system return and flows it into the flow, thus allowing to recover heat and balance the temperature; ideal for floor systems
- lower by-pass (boiler side): it allows the bypassing of the flow water in presence of the pump in the boiler and no hydraulic separator.
The unit is supplied as standard with right or left flow.
Plus / Advantages:
• Compact control unit ready for installation
• 3-way mixing valve controlled by a thermostatic actuator
• Electronic pump H = 130 mm, attach 1"
• Extremely easy maintenance: control and replacement of the pump without emptying the system
• Return pipe with non-return valve
• Seals secured by flat stops and seals
• Ball-valves on the flow and return with integrated thermometer
• Thermal insulation in black EPP
Variants
HVTC-90 with Wilo PARA SC 15/1-6 - DX (Cod. 49025635)HVTC-90 without pump - R (Cod. 49022552)
