• Loavto Spa
  • Loavto Spa
  • Loavto Spa
  • Loavto Spa
  • Loavto Spa

SEPARATION UNITS AND BIOMASS SYSTEMS

Lovato Spa
SEPARAZIONE
SEPARATION MODULES – Biomass Systems
LOVATO_BW-30
BW-30 Separation unit
T-BACK PRO LOVATO SEPARAZIONE
T-BACK PRO Boiler loading unit
LOVATO_T-BACK-e_2014
T-BACK e Boiler loading unit
kit s + 2 circ + antic 002
T-FIRE MODUL – Separation module
SEPARAZIONE

SEPARATION MODULES – Biomass Systems

LOVATO_BIOMASSA_TERMOCAMINO

 

INTERFACE AND MANAGEMENT UNITS FOR BIOMASS BOILER: THE RENEWABLE TO THE MAXIMUM POWER.

LOVATO offers a wide range of pre-assembled hydraulic units  suitable for all type of fireplace, stoves, open circuit pellet boilers.
They separate the primary circuit to the second one.

 

LOVATO_BIOMASSA_RINNOVABILI

The LOVATO separation modules are certified and in compliance with the Directive of the sector.

Modularity, compactness and flexibility make the difference.

The LOVATO modules are pre-assembled, pre-wired. The balancing of the system will be easy and safe.

With LOVATO separation modules you can reduce the service requires and increase the energy efficiency

LOVATO_BW-30

BW-30 Separation unit

LOVATO BW-30 is designed for the following applications:

 

• Radiant panels having the circulating water heated by cast iron and firewood boilers. Impurities may damage or cause a defect working of the floor/wall circuit.
• Systems having old plastic piping. In this case, oxygen could damage the heating boiler.
• In presence of domestic water production by means of a storage tank.
• When a separation of the primary circuit from a traditional heating circuit is necessary.
• The unit is supplied without circulator as standard.


Application

Connection of BW separation unit (secondary) with boiler loading unit T-BACK PRO (primary)

LOVATO_BW-30_COMPOSIT

 

LOVATO BW-30 – SEPARATION UNIT
30 Plates
Circulating pump advised for domestic hot water (not supplied)

Standard circulating pump for heating
• Wilo YONOS PARA RS 25/1-6  ERP READY 
• Wilo RS 15/6-3 KU (PN6 – T max. 95 °C)

T-BACK PRO LOVATO SEPARAZIONE

T-BACK PRO Boiler loading unit

T-BACK PRO is a system that keeps constant the return temperature of the solid fuel boiler (firewood, pellet).

 

Through the 3-way mixing valve the system bypasses the water to the boiler flow on the return way up to the flow temperature set (55°C) is reached.

The valve proportionally closes the bypass and opens the return way.

In this case it allows the total circulation of the water to the users and the heating boiler in order to reach quickly the proper working temperature, prevents damages by smoke or soot inside the chimney flue and avoids the phenomenon of condensation in the heating boiler.

The unit is available with our without circulator.

 

ADVANTAGES

• Keeps constant the return temperature of the solid fuel boiler
• The heating boiler can quickly reach the proper working temperature
• Prevents damages by smoke or soot inside the chimney flue
• Control and maintenance of the pump without having to empy the system
• All seals are assured by flat fittings and gaskets
• Flanged ball valves with thermometers on flow/return position
• Easy accessibility to all components
• Thermal insulation with black EPP
• Directly connectable to the zone manifold

 

LOVATO DN25 T-BACK PRO – Boiler loading unit

• Without Circulator
• Wilo YONOS PARA RS 25/1-6  ERP READY – ALTA EFFICIENZA

 

Working principle

T-BACK PRO SCHEMA DI FUNZIONAMENTO

B-AB – the thermal valve is closed to the users as long the water in the boiler loop is colder than the opening temperature of the thermal valve. The pump recirculates the water through bypass “B” that is completely open.

AB – When the water is reaching the opening temperature of the valve, the way to the user is proportion A-

AB – The flow temperature of the boiler increases to allow the total opening to the users and the closing of the bypass.

LOVATO_T-BACK-e_2014

T-BACK e Boiler loading unit

The T-BACK e is a unit for the maintenance of the return flow suitable for fuel boilers, wood firing and stove heating systems.

 

The T-BACK e is a unit for the maintenance of the return flow suitable for fuel boilers, wood firing and stove heating systems.

The system is composed of a 3-way valve, controlled by a settable constant temperature electronic controller.

The activation / deactivation of the module is determined by two temperature sensors: one placed on the return circuit and the other one placed on the fuel boiler return.

The valve will keep open the return of the solid fuel boiler up to the set-up temperature will be reached, then will divert the flow to the users.

Even when the users will be satisfied and the temperature difference between flow and return will be null, the pump of the module will be switched off. In this way the solid fuel boiler will quickly reach the right working temperature, avoiding damages of smoke or soot into the chimney flue and the phenomenon of condensation into the solid fuel boiler.

The unit is available with our without pump.

 

ADVANTAGES

• Keeps constant the return temperature of the solid fuel boiler
• The solid fuel boiler can quickly reach the proper working temperature
• Prevents damages of smoke or soot inside the chimney flue
• Control and maintenance of the pump without having to empty the system
• All seals are assured by flat fittings and gaskets
• Flanged ball valves with thermometers on flow/return position
• Easy accessibility to all components
• Thermal insulation in black EPP
• Directly connection to the zone manifold

 

 

LOVATO T-BACK e – Boiler loading unit

• Without pump
• Wilo YONOS PARA RS 25/1-6  ERP READY 

 

Working principle

T-BACK-e APplicazioni

B-AB – the thermal valve is closed to the users as long the water in the boiler loop is colder than the opening temperature of the thermal valve. The pump recirculates the water through bypass “B” that is completely open.

AB – When the water is reaching the opening temperature of the valve, the way to the user is proportion

A-AB The flow temperature of the boiler increases to allow the total opening to the users and the closing of the bypass.

kit s + 2 circ + antic 002

T-FIRE MODUL – Separation module

T-FIRE MODUL is a separation module available in several configurations, it is suitable for the direct connection of an open vented solid fuel boilers (wood boiler, pellets boiler, stoves) and a sealed heating system with traditional gas boilers. 

The heating system is normally heated by the water coming from the gas boiler up to the water produced by the solid fuel boiler has reached the right temperature.

When the T-FIRE MODUL reaches a minimum setpoint temperature the gas boiler is switched off and the solid fuel boiler will supply the heating demand.

Thanks the heat exchanger the two circuits are completely separated. This system avoids that the two energy sources work at the same time.

The electronic control with two sensors allow a complete management of the heating system.

The module can work also with water and glycol.

 

ADVANTAGES

• Extremely compact module
• Pumps and control components (thermostatic and motorized valves) placed in the return circuits (primary and secondary) for protection to the high temperature
• Oversized heat exchangers for granting high performance
• Primary circuit supply (solid fuel side) with deaeration and sludge removal system
• 106 possible configurations
• Electronic control with two temperature sensors
• DHW kit with 3-port proportional valve and thermostatic control that acts on the flow rate of the primary circuit return, in order to grant the setting DHW temperature
• 60° anti-condensing valve set up
• Wall-hung and built-in versions
• Built-in version: depth 110 mm

 

Example of application

T-FIRE MODUL SCHEMI DI APPLICAZIONE Separazione-Biomassa4