• Loavto Spa
  • Loavto Spa
  • Loavto Spa
  • Loavto Spa

SMART ENERGY MONITORING SOLUTIONS

Lovato Spa
ENRGY MONITORING
Energy Monitoring
ENERGY TUTOR PC
Energy Tutor Monitoring System
SERVER HIQOO
hiQoo™ Server Data Cloud
Concentratore Dati 1
Data logger CD-B for local reading
Concetratore dati antenna
CD-M data logger GPRS modem
MASETR 32
MASTER 32 Radio receiver
MASTER GPRS 8
MASTER GSM/GPRS 8 Radio receiver
MOBILE REVBIEVER
MOBILE RECEIVER WIRELESS M-BUS 868 MHZ
SOFTWARE DATA ENERGY
SOFTWARE DATA ENERGY
CONTATORI ELETTRICI
ELECTRIC ENERGY METERING
ENRGY MONITORING

Energy Monitoring

BANNER ENERGY TUTOR

Instruments for data management and data acquisition

 

Data acquisition software for displaying and reporting of energy consumptions: heating/cooling energy, volumes (water, fuel), electricity.

 

Energy_Tutor_Sintesi

ENERGY TUTOR PC

Energy Tutor Monitoring System

Instruments for data management and data acquisition

 

SCHEMA ENERGY MONITORING

 

 

EnergyTutor™ counts every consumption of:

THERMAL ENERGY (calories and frigories)

VOLUMES (Hot Domestic Water and gas fuels)

ELECTRIC ENERGY

• With self-configuring energy counters quick to install and MID Certificates

• Energy consumption calculation in Euros.

• Instantaneous remote identification of malfunctions.

• Remote counting of several buildings.

 

 

 

ENERGY MONITORING SCHEMA5

 

 

 

Trend analysis of power use of loads

 

Energy_tutor_report_grafici copia

 

Possibility to compare consumptions of different periods

 

ET 1

 

Energetic costs calculation by inserting the supply fees

 

ET 3

 

Energiebericht entweder in verbrauchter Energie oder in Euro, aufgeteilt für jeden Anwender

 

 ET 2

 

SERVER HIQOO

hiQoo™ Server Data Cloud

Web Server for the collection and transmission of consumption data (electric energy, thermal energy, volumetric consumptions of fluids and gas fuels) to Datacenter Cloud.

It is the perfect tool for Energy Manager, apartment block administrators, business companies and privates.

• Essential support to Energy Audit, it monitors the ACTUAL CONSUMPTIONS with extreme precision and high frequency.

• Useful for subdivision of consumption data in cost centers (direct/indirect costs).

• The server includes the on-line user license of the software for the visualization and reporting of counted data “ENERGY TUTOR”.
Dimensions: 120x120x43
Power supply: External charger 110/230 Vac
Shell: Aluminium, without fan

ENERGY TUTOR POWER COLOR

 

Concentratore Dati 1

Data logger CD-B for local reading

Data logger CD-B for local reading.

It is a compact electronic device used for centralised reading and data collection about the consumptions of energy counters equipped with M-bus exit.

It is equipped with a USB exit for local reading through PC; in combination with DATA ENERGY software it is possible to create a M-bus counter list and read the consumptions through some easy steps. Furthermore every reading may be saved under .xml or .csv format so that they can be checked again and be processed using common software (ex. Microsoft Excel).

 

• Supply source 230 Vac, 50 Hz, 10 W
• Assembling on DIN guide
• USB Interface
• M-bus Interface
• 8 digital entries (2 of which may be configured as counters)
• 3 exits+1 additional relay exit (6A 250V with ohmic load)
• Possibility to set 2 e-mail addresses for data collection
• Law conformance: Low voltage legislation, EMC legislation, EN 60715 RULE, EN 13757 RULE.

 

Centralized reading

• CD-B 32 – 32 LOVATO LVT/5_EYRON – 16 MULTIDATA WR3
• CD-B 60 – 60 LOVATO LVT/5_EYRON – 30 MULTIDATA WR3
• CD-B 120 – 120 LOVATO LVT/5_EYRON – 60 MULTIDATA WR3
• CD-B 250 – 250 LOVATO LVT/5_EYRON – 125 MULTIDATA WR3

 

 

Concetratore dati antenna

CD-M data logger GPRS modem

CD-M data logger with integrated GPRS modem.

It is a compact electronic device with integrated modem used for centralised reading and data collection about the consumptions of energy counters equipped with M-bus serial exit.

The reading may be done in local modality, by connecting to the logger with a PC via USB standard equipment ( in combination with DATA ENERGY software it is possible to create a M-bus counter list), or from a remote location via modem, in which case collected data will be sent through the GPRS network.

Moreover CD-M logger has additional universal functions: instantaneous remote alarm in case of error or manipulation, remote control through 8 configurable entries, remote controller for other devices through relays exits.

The system configuration may be accomplished by means of a PC or a simple mobile phone through SMS. The user will have to use a suitable data transmission enabled SIM card from a local operator.

 

• Supply source 230 Vac, 50 Hz, 10 W
• Assembling on DIN guide
• USB Interface
• M-bus Interface
• 8 digital entries (2 of which may be configured as counters)
• 3 exits+1 additional relay exit (6A 250V with ohmic load)
• Possibility to set 2 e-mail addresses for data collection
• Law conformance: Low voltage legislation, EMC legislation, EN 60715 RULE, EN 13757 RULE.

• Data Transmission/collection via Dual Band GSM/GPRS modem
• Setting of 4 telephone numbers for maintenance personnel;
• SMA-F connector for connection with external antenna

 

Remote centralised reading

• CD-M 60 – 60 LOVATO LVT/5_EYRON – 32 MULTIDATA WR3
• CD-M 120 – 120 LOVATO LVT/5_EYRON – 60 MULTIDATA WR3
• CD-B 250 – 250 LOVATO LVT/5_EYRON – 125 MULTIDATA WR31

 

 

 

MASETR 32

MASTER 32 Radio receiver

Module equipped with both M-Bus wire entry and Wireless M-Bus 868 MHz receiver. 

 

Several interfaces for data downloading are available: RS232, USB, IR.

It may be connected through optical entry to MASTER GSM-GPRS (check hereunder) for data transmission via GSM-GPRS.

Number of counters that can be managed: 32 M-Bus, 500 Wireless M-Bus. Power source 220 V.

Available accessories: external omnidirectional antenna in order to increase the receiving distance.

 

 

AUTOMATIC INSTALLATION

The installation of wireless M-Bus devices is automatic. Therefore, once the automatic installation is run, every device included in the range will be identified and configured. Eventually, settings can be modified and the cryptography configured in order to guarantee connection safety.

 

EASY TO CONFIGURE

The device configuration is easy and may be accomplished on display or with standard M-bus controls. On display will be displayed the operation in progress, the installed devices, the operating mode of M-bus and other information. No further tools are necessary to start the device and for its operations.

 

USE IN PREEXISTING M-BUS SYSTEMS

The reading of installed wireless M-Bus devices may be accomplished with MBus standard controls on the M-Bus slave port. This function makes the module compatible with every wired M-Bus system.

 

 

 

MASTER GPRS 8

MASTER GSM/GPRS 8 Radio receiver

MASTER M-BUS of the next generation, ready to use and compatible with any counter with M-bus standard.

Data transmission is accomplished via GSM/GPRS through FTP protocol, http or via e-mail.

The module may be configured via SMS.

Management of 8 M-bus counters and expandable through modules MASTER 32 M-BUS + 500 W. M-BUS up to 256 counters.
Power supply 220 V.

MOBILE REVBIEVER

MOBILE RECEIVER WIRELESS M-BUS 868 MHZ

Radio receiver 868 MHz Wireless M-Bus.

It is used as a mobile reading system, alone or combined with a PC.

Power source: rechargeable lithium battery.

Integrated interfaces: Bluetooth (100 m), USB, LAN.

No limitations on the number of counters that can be managed.

 

 

 

MOBILE BOX

RECEIVER BOX

Protection box / installation of radio receiver 868 MHz Wireless M-Bus.

Including DIN bar, power source socket and ON/OFF switch.

 

SOFTWARE DATA ENERGY

SOFTWARE DATA ENERGY

DATA ENERGY local reading software

DATA ENERGY permits an immediate reading of the LVT/3 energy counters and water counters in a building equipped with a M-bus centralised communication. 

The software, entirely in Italian, allows to communicate directly with the devices without having to address them and it also allows to manage downloaded data through a customisable and easy logging application both at system level and user level.

Everything is supplied in a self-installing USB Pen drive which may be updated online; as it works as a hardware key, it is intended software license.

 

The use of unshielded twisted pair wire is recommended, 2 poles of Ø 0,8 mm =0,5 mm² each.

Moreover it is recommended to isolate M-bus wires with separate cable ducting.

 

DATA SCHEMA ENERGY

 

Systems with a high number of users are analysed case by case, according to building needs (data collection convenience, wiring, maintenance etc.)

The example of data collection here above reported are approximate and have been developed under the best possible conditions of proper connections/cable ducting/wires.

CONTATORI ELETTRICI

ELECTRIC ENERGY METERING

CONCENTRATORE 1

SINGLE-PHASE COUNTER ≤ 80A

Static counter (direct insertion) of active and reactive energy on 4 dials with MID certification for single-phase systems.

The counter includes the communication module M-Bus with optic coupling.

 

 

Concentratore 2

THREE-PHASE COUNTER ≤ 80A

Static counter (direct insertion) of active and reactive energy on 4 dials with MID certification for three-phase systems 3 or 4 wires with unbalanced loading.

The counter includes the communication module M-Bus with optic coupling.

 

 

Concentratore 4Concentratore 3

THREE-PHASE COUNTER >80 and ≤ 100A

Static counter (combined with ampere transformers) of active and reactive energy on 4 dials with MID certifi cation for three-phase systems 3 or 4 wires with unbalanced loading.

The counter includes the communication module M-Bus with optic coupling.